Carrier Access Network Device Axxius 800 Instrukcja Użytkownika Pobierz pdf (Strona 490)

100

101

18-2 Axxius 800 - Release 2.2

Maintenance

Software Loading

Loading System Software via TFTP

1. Login to the Axxius 800, using a terminal emulation program or via Telnet.

NOTE: The tftp utility provided by Carrier Access with the downloadable

software must be running, in the same directory as the software file.

Command Description

load standby tftp {ip-addr}

"file-name"

CLI command to load software to the Standby

Controller. See the load tftp command for

details.

reset standby

Do you really want to do

this ? Y

Reset the Standby Controller. You will be asked

to confirm this command, answer Y (Yes). See

reset (controller) command for details.

status equipment Check the Standby Controller status, when it

displays hot standby go on to the next step. If hot

standby does not display stop here. If you go

further you may affect service. Start the

process again and if you are not successful call

Customer Service. See status equipment

command for more details.

switch controller Set the signal clock switching. See the set clock

command for details.

Note: You will be disconnected from the unit when switching Controllers. Re-establish

connection with Axxius.