Carrier Access Network Device Axxius 800 Instrukcja Użytkownika Pobierz pdf (Strona 110)

100

101

5-10 Axxius 800 - Release 2.2

CLI Commands

add

add (router) snmp community

Use the add (router) snmp community command to add a SNMP community to an interface

on the specified Router card.

Syntax: add {rtr_card-addr} snmp community {read|write|both}

{"community-name"} {ip-addr}

Example: add 2 snmp community both "commune" 192.168.100.245

The example will allow the host 192.168.100.245 read/write access to the TSR

card SNMP agent using the community name "commune". The TSR is located

in slot 2.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{read|write|both}

{"community-name"}

Name of the community to add with a maximum length of 10 characters. Must be enclosed

in quotes.

{ip-addr}

The IP address of the host that can access the SNMP agent via this community, in the form

of xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0" allows any host.

both Will set the community to be read/write

read Will set the community to be read-only

write Will set the community to be write-only

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier Access Network Device Axxius 800 Instrukcja Użytkownika Strona 110

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Carrier Access Network Device Axxius 800