Carrier Access Network Device Axxius 800 Instrukcja Użytkownika Pobierz pdf (Strona 225)

100

101

Axxius 800 - Release 2.2 5-125

CLI Commands

set

set (router) ppp auth

Use the set (router) ppp auth command to configure the PPP (Point-to-Point Protocol)

authentication on the specified Router card.

set (router) ppp auth byremote protocol

Syntax: set {rtr_card-addr} ppp auth byremote protocol

{chap|none|pap}

Example: set 5 ppp auth byremote protocol none

The example will set the Router in slot 5 to not allow PPP authentication of this

Axxius by the remote PPP device.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{chap|none|pap}

set (router) ppp auth byremote secret

Syntax: set {tsr_card-addr} ppp auth byremote secret

{"password"}

Example: set 5 ppp auth byremote secret "public"

The example will set the PPP authentication secret/password for the TSR in slot

5 to "public"

Note: A set (router) ppp auth by remote protocol command must be

completed before this command can be implemented.

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{"password"}

A password with a maximum of 15 characters, enclosed in quotes.

chap Set to the CHAP protocol.

none The remote PPP device cannot authenticate this Axxius (default).

pap Set to the PAP protocol.

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier Access Network Device Axxius 800 Instrukcja Użytkownika Strona 225

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Carrier Access Network Device Axxius 800