Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 456)

100

101

24-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Voice Port Trunk Mode

registration

The registration command enables the user to Add, Edit, Remove, Enable, Disable PBX line number

behind a voice trunk that will register to the SIP proxy.

registration enable

Use the Voice Port Trunk registration enable command to enable the Voice Port registration

feature. To disable Voice Port registration, see no registration enable command on page 24-9.

Syntax: (config-vport-trk-{n})# registration enable

Example: (config-vport-trk-1)# registration enable

Supported Platforms:

Adit 3500, MSR

registration line authentication

Use the Voice Port Trunk registration line authentication command to configure the username to

authenticate.

Syntax: (config-vport-trk-{n})# registration line value line-numbers

value authentication {phone-number|username username} password

password

Example: (config-vport-trk-1)# registration line 1 line-numbers 3

authentication phone-number password hello

Supported Platforms:

Adit 3500, MSR

Field Definition

line value Enter the PBX line number to configure. Range is 1 - 300.

line-numbers value Define the number of lines in this block that are going to be registered.

Starting from the first-phone-number, increased by 1 each.

phone-number Set the phone number to authenticate.

username username Set the user name to authenticate.

password Enter a password for the authentication.

1 2 ... 451 452 453 454 455 456 457 458 459 460 461 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 456

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca