Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 275)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-5

Configuration - Multilink Interface Mode

history

Use the history command to display commands that have been entered in this session. This command

can be entered in any configuration mode.

Syntax: (config-int-mlink-{n})# history

Example: (config-int-mlink-1)# history

description testdesc

firewall enable

ip rip enable

ppp authentication pap

ppp encryption 128-bit

history

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ip address

Use the Multilink Interface ip address command to configure the MLPPP IP address. To remove an IP

address, see no ip address command on page 12-14.

Syntax: (config-int-mlink-{n})# ip address {address mask

mask|auto|unnumbered} [secondary]

Example: (config-int-mlink-1)# ip address 192.168.2.100 mask

255.255.255.0

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

address Enter an IP address to assign to the port.

mask Enter a subnet mask for the IP address.

auto Uses IPCP to assign an IP address.

unnumbered Set the Multilink IP address to unnumbered.

secondary This optional parameter, defines the address to be a secondary IP

address.

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 275

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca