Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 214)

100

101

7-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - DHCP Pool Ethernet Mode

history

Use the history command to display commands that have been entered in this session.

NOTE: This command can be entered in any configuration mode.

Syntax: (config-dhcp-eth-{n})# history

Example: (config-dhcp-eth-1)# history

end-address 192.168.1.250

lease 900

relay 192.168.1.120

start-address 192.168.1.1

subnet-mask 255.255.255.0

history

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

lease

Use the DHCP lease command to define the DHCP lease time, in minutes. This defines the lease

duration, or the length of time for which the IP address can be used before a lease renewal is required,

or if the address is no longer in use, it is automatically returned to the pool for reallocation.

Syntax: (config-dhcp-eth-{n})# lease time

Example: (config-dhcp-eth-1)# lease 120

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

time Enter the DHCP lease time. Range is 1 - 71582788 minutes, with a

default of 60.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 214

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca