Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 250)

100

101

11-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Ethernet Interface Mode

history

Use the history command to display commands that have been entered in this session. This command

can be entered in any configuration mode.

Syntax: (config-int-eth-{n})# history

Example: (config-int-eth-1)# history

schedule-availability rule1

history

full-duplex

ip rip

ip rip enable

ip address

speed auto

history

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ip address

Use the Ethernet Interface ip address command to set the IP address for the Ethernet port. To remove

an IP address, see no ip address command on page 11-17.

Syntax: (config-int-eth-{n})# ip address {address mask mask [secondary]

|auto}

Example: (config-int-eth-1)# ip address 192.168.2.100 mask 255.255.255.0

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

address Enter an IP address to assign to the Ethernet port.

mask Enter a subnet mask for the Ethernet IP address.

auto Use DHCP to assign an IP address.

secondary This optional parameter, defines the address to be a secondary IP

address.

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 250

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca