Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 393)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-15

Configuration - PPTPC Mode

no ip ospf hello-interval

Use the PPTP Client no ip ospf hello-interval command to reset the interval of time to the default

setting of the path cost to the default setting of 10 seconds. To define the interval of time between

hello packets sent on the interface, see ip ospf hello-interval command on page 17-8.

Syntax: (config-pptpc-{n})# no ip ospf hello-interval

Example: (config-pptpc-1)# no ip ospf hello-interval

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no ip ospf message-digest-key

Use the PPTP Client no ip ospf message-digest-key command to remove an old MD5 key. To

enable OSPF MD5 (Message-Digest) authentication, see ip ospf message-digest-key command on

page 17-8.

Syntax: (config-pptpc-{n})# no ip ospf message-digest-key key-id

Example: (config-pptpc-1)# no ip ospf message-digest-key 1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

no ip ospf priority

Use the PPTP Client no ip ospf priority command to set the router priority to the default setting of

priority 1. To set the router priority, which determines the designated router for this network, see ip

ospf priority command on page 17-9.

Syntax: (config-pptpc-{n})# no ip ospf priority

Example: (config-pptpc-1)# no ip ospf priority

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

key-id Enter an ID for this key. Range is 1-255.

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 393

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca