Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika

Adit 3000 Series andMulti-Service Router (MSR) CardCLI REFERENCE MANUAL Part Number: 770-0165 BBProduct Release: Adit 3000 Series - 1.6MSR Card - 2.

x Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents remote-admin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-42 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow ip ospf databaseUse the show ip ospf database command to display information r

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-43 Privileged ModeExample: adit 3500# show ip ospf database Router Link States (Are

3-44 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow ip ospf interfaceUse the show ip ospf interface command to display OSPF relate

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-45 Privileged Modeshow ip ospf neighborUse the show ip ospf neighbor command to display OSPF neighb

3-46 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow ipsecUse the show ipsec command to display the IPSec Connections or the connec

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-47 Privileged Modeshow l2tpcUse the show l2tpc command to display the Layer 2 Tunneling Protocol Co

3-48 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow licensesUse the show licenses command to display all enabled feature keys. S

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-49 Privileged Modeshow logUse the show log command to display the current events on the system.Synt

3-50 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow mac-address-tableUse the show mac-address-table command to display the current

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-51 Privileged Modeshow port-triggerUse the show port-trigger command to display the port trigger in

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI xi Table of Contents ppp username . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-52 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow pptpcUse the show pptps command to display the PPTP connections or the PPTP co

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-53 Privileged Modeshow pptpsUse the show pptps command to display the PPTP Server settings. Synta

3-54 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow running-configUse the show running-config command to display the current confi

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-55 Privileged Modeno radius-server voice-port trunk 1 description Trunk 1 no comfort-nois

3-56 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Mode session-timer refresher uac no session-timer mode redundancy type non

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-57 Privileged Mode no schedule-availability ip ospf authentication null exitinterface e

3-58 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modevoice-port fxs no digit-map dial-timeout 5 exitvoice-port fxs 1 des

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-59 Privileged Mode registration retry-timeout 500 registration tries 2 registration fai

3-60 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Mode no ipsec log ike msg-enc-dec no ipsec log ike msg-inp no ipsec log ike

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-61 Privileged Modeshow serviceUse the show service command to display all service information. Not

xii Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-62 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow usersUse the show users command to display all users on this system. Syntax: #

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-63 Privileged ModeExample: Adit MSR# show versionApplication Version: 2.0.0.5Compilation Time: Thu

3-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow voice-port fxsUse the show voice-port fxs command to display the FXS voice por

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-65 Privileged Modeshow voice-port trunkUse the show voice-port trunk command to display the trunk v

3-66 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged ModeExample: adit MSR# show voice-port trunk 1******************************* PRI 1 *

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-67 Privileged ModetracerouteUse the traceroute command to trace a route to a remote host. Syntax:

3-68 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Mode

CHAPTER 4Global Configuration ModeThe Global Configuration Mode allows commands to be entered directly to the router configuration. From this level, a

4-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeCommands for Entering Configuration SubmodesConfiguration Mode Link to Com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-3 Global Configuration ModeGlobal Configuration CommandsGlobal Configuration Commands• access • l2t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI xiii Table of Contents 15 Configuration - L2TPC Modedo . . . . . . . . . . . . . . . . . . . . . . .

4-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration CommandsaccessUse the access command to enable remote

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-5 Global Configuration ModeGlobal Configuration Commandsaccess-list Use the access-list command to

4-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration CommandsExample: (config)# access-list rule new apply

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-7 Global Configuration ModeGlobal Configuration Commandscontroller lccUse the controller lcc comman

4-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsdatedate auto-time-updateUse the date auto-ti

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-9 Global Configuration ModeGlobal Configuration Commandsdate summer-timeUse the date summer-time co

4-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsdate timezoneUse the date timezone command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-11 Global Configuration ModeGlobal Configuration Commandsdial-peer voicedial-peer voice pots fxsUse

4-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsdial-peer voice voipUse the dial-peer voice

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-13 Global Configuration ModeGlobal Configuration CommandsdoUse the do commands to run User and Priv

xiv Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents 16 Configuration - OSPF Modearea commands . . . . . . . . . . . . . . . . . . .

4-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsdynamic-dnsUse the dynamic-dns commands to c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-15 Global Configuration ModeGlobal Configuration Commandsdynamic-dns mail-exchangerUse the dynamic-

4-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsdynamic-dns wildcardUse the dynamic-dns wild

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-17 Global Configuration ModeGlobal Configuration CommandshelpUse the help command to display the he

4-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration CommandshistoryUse the history command to display co

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-19 Global Configuration ModeGlobal Configuration Commandshost-filterUse the host-filter command to

4-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsinterface multilinkUse the interface multili

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-21 Global Configuration ModeGlobal Configuration CommandsipsecUse the ipsec commands to create an I

4-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsipsec log ikeUse the ipsec log ike command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-23 Global Configuration ModeGlobal Configuration Commandsipsec log ipsecUse the ipsec log ipsec com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI xv Table of Contents ppp restart-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsipsec net-to-netUse the ipsec net-to-net com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-25 Global Configuration ModeGlobal Configuration Commandsip dhcp pool ethernetUse the ip dhcp pool

4-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration CommandskeyUse the key command to enable a specific

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-27 Global Configuration ModeGlobal Configuration Commandslocal-serverUse the local-server command t

4-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsloglog lcc bufferUse the log lcc buffer comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-29 Global Configuration ModeGlobal Configuration Commandslog priUse the log pri command to configur

4-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandslog security notifyUse the log security noti

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-31 Global Configuration ModeGlobal Configuration Commandslog system bufferUse the log system buffer

4-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandslog t1 bufferUse the log t1 buffer command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-33 Global Configuration ModeGlobal Configuration Commandsmail-servermail-server authentication enab

xvi Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents 21 Configuration - VLAN Port Modedo . . . . . . . . . . . . . . . . . . . . . . .

4-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsmail-server portUse the mail-server port com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-35 Global Configuration ModeGlobal Configuration Commandsnat-bypassUse the nat-bypass command to cr

4-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno commandsno accessUse the access command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-37 Global Configuration ModeGlobal Configuration Commandsno access-listUse the no access-list comma

4-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno date summer-timeUse the no date summer-ti

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-39 Global Configuration ModeGlobal Configuration Commandsno dial-peer voice voipUse the no dial-pee

4-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno host-filterUse the no host-filter command

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-41 Global Configuration ModeGlobal Configuration Commandsno ipsec log ipsecUse the no ipsec log ips

4-42 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno ipsec vpn_ipsecUse the no ipsec vpn_ipsec

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-43 Global Configuration ModeGlobal Configuration Commandsno ip dhcp pool ethernetUse the DHCP Pool

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI xvii Table of Contents history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-44 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno local-serverUse the no local-server comma

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-45 Global Configuration ModeGlobal Configuration Commandsno network-objectUse the no network-object

4-46 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno pptpsUse the no pptps command to disable

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-47 Global Configuration ModeGlobal Configuration Commandsno remote-admin telnetUse the no remote-ad

4-48 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno remote-admin webUse the no remote-admin w

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-49 Global Configuration ModeGlobal Configuration Commandsno security-logUse the no security-log com

4-50 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno serviceUse the no service command to disa

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-51 Global Configuration ModeGlobal Configuration Commandsno static-dnsUse the no static-dns command

4-52 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsno vlanUse the no vlan command to clear all

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-53 Global Configuration ModeGlobal Configuration Commandsport-trigger serviceUse the port-trigger s

xviii Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents

4-54 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsradius-clientUse the radius-client command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-55 Global Configuration ModeGlobal Configuration Commandsremote-admin telnetUse the remote-admin te

4-56 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsremote-admin webUse the remote-admin web com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-57 Global Configuration ModeGlobal Configuration Commandssecurity-defaultUse the security-default c

4-58 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandssecurity-logUse the security-log command to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-59 Global Configuration ModeGlobal Configuration CommandsserviceUse the service command to create/m

4-60 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration CommandsExample: (config)# service id 5 name test de

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-61 Global Configuration ModeGlobal Configuration Commandssnmp-server hostUse the snmp-server host c

4-62 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsstatic-dnsUse the static-dns command to conf

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-63 Global Configuration ModeGlobal Configuration CommandsusernameUse the username command to create

CHAPTER 1IntroductionThis Reference Manual covers the Command Line Interface (CLI) for the following products:z Adit 3000 series (Adit 3104, Adit 3200

4-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsvlan (vlan-id)Use the vlan command to allow

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-65 Global Configuration ModeGlobal Configuration Commandsvoice-port (global)Use the voice-port fxs

4-66 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIGlobal Configuration ModeGlobal Configuration Commandsvoice-port trunkUse the voice-port trunk com

CHAPTER 5Configuration - LCC Controller ModeThe LCC (Link Cross-Connect) Controller Configuration commands allow the user to configure the Link Cross-

5-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - LCC Controller ModedescriptionUse the Controller LCC description command to enter a

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 5-3 Configuration - LCC Controller ModedoUse the do commands to run User and Privileged mode commands

5-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - LCC Controller ModeendUse the end command to exit the current configuration mode, a

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 5-5 Configuration - LCC Controller ModehistoryUse the history command to display commands that have b

5-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - LCC Controller ModeshutdownUse the Controller LCC shutdown command to set the LCC i

CHAPTER 6Configuration - T1 Controller ModeThe T1 Controller Configuration commands allow the user to configure the T1 parameters on the Adit 3000 ser

Copyright 2008 Turin Networks Inc. All rights reserved.The information presented in this manual is subject to change without notice and does not repre

1-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIntroductionOverviewOverviewThe Adit 3000/MSR CLI has three command modes, each with access to diff

6-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - T1 Controller ModedescriptionUse the Controller T1 description command to set the c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-3 Configuration - T1 Controller ModedoUse the do commands to run User and Privileged mode commands.

6-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - T1 Controller Modeds0-groupUse the Controller T1 ds0-group command to create a grou

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-5 Configuration - T1 Controller ModefdlUse the Controller T1 fdl command to set line Facilities Dat

6-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - T1 Controller ModehistoryUse the history command to display commands that have been

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-7 Configuration - T1 Controller Modelbolbo longUse the Controller T1 lbo long command to set Line B

6-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - T1 Controller ModelinecodeUse the Controller T1 linecode command to set the line co

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-9 Configuration - T1 Controller ModeloopdetectUse the Controller T1 loopdetect command to enable th

6-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - T1 Controller Modeno shutdownUse the Controller T1 no shutdown command to set the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-11 Configuration - T1 Controller ModeshutdownUse the Controller T1 shutdown command to set the T1 i

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 1-3 IntroductionOverviewPrompt IdentifierWhen you initiate a CLI session it will open in User mode, w

6-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - T1 Controller ModethresholdUse the Controller T1 threshold command to define the i

CHAPTER 7Configuration - DHCP Pool Ethernet ModeThe DHCP Pool Configuration commands allow the user to configure the DHCP parameters for each interfac

7-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - DHCP Pool Ethernet ModedoUse the do commands to run User and Privileged mode comman

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 7-3 Configuration - DHCP Pool Ethernet ModeendUse the end command to exit the current configuration mo

7-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - DHCP Pool Ethernet ModehistoryUse the history command to display commands that have

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 7-5 Configuration - DHCP Pool Ethernet Modeno commandsno optionUse the DHCP Pool no option command to

7-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - DHCP Pool Ethernet ModeoptionUse the option command to configure DHCP options per R

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 7-7 Configuration - DHCP Pool Ethernet Modestart-addressUse the DHCP Pool start-address command to def

7-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - DHCP Pool Ethernet Modesubnet-maskUse the DHCP Pool subnet-mask command to define t

CHAPTER 8 Configuration - Dial Peer FXS ModeThe Dial Peer FXS Configuration commands allow the user to configure the Dial Peer FXS parameters.Enter th

1-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIntroductionOverviewConfiguration Modez Allows users to configure specific features/functions. z Us

8-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer FXS Modeblock-out-caller-idUse the Dial Peer block-out-caller-id command

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 8-3 Configuration - Dial Peer FXS Modecodec preferenceUse the Dial Peer codec preference command to s

8-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer FXS ModedoUse the do commands to run User and Privileged mode commands. T

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 8-5 Configuration - Dial Peer FXS ModeendUse the end command to exit the current configuration mode,

8-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer FXS Modefax-protocolUse the Dial Peer fax-protocol command to configure t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 8-7 Configuration - Dial Peer FXS Modemodem-protocolUse the Dial Peer modem-protocol command to confi

8-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer FXS Modeno commandsno block-out-caller-idUse the Dial Peer no block-out-c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 8-9 Configuration - Dial Peer FXS Modeno codec preferenceUse the Dial Peer no codec preference comman

8-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer FXS Modesip-authenticationNote: To disable this SIP authentication, see

CHAPTER 9Configuration - Dial Peer Trunk ModeThe Dial Peer Trunk Configuration commands allow the user to configure the Dial Peer Trunk parameters.Ent

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 1-5 IntroductionCommand Syntax ConventionsCommand Syntax ConventionsThe conventions used to present c

9-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer Trunk Modecodec preferenceUse the Dial Peer codec preference command to s

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 9-3 Configuration - Dial Peer Trunk ModedoUse the do commands to run User and Privileged mode command

9-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer Trunk ModeendUse the end command to exit the current configuration mode,

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 9-5 Configuration - Dial Peer Trunk ModehistoryUse the history command to display commands that have

9-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer Trunk Modeno commandsno codec preferenceUse the Dial Peer no codec prefer

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 9-7 Configuration - Dial Peer Trunk ModeprefixUse the Dial Peer prefix command to define the prefix o

9-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer Trunk Modesip-authentication usernameUse the Dial Peer sip-authentication

CHAPTER 10Configuration - Dial Peer VoIP ModeThe Dial Peer VoIP Configuration commands allow the user to configure the Dial Peer VoIP parameters.Enter

10-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer VoIP Modedestination-patternUse the Dial Peer destination-pattern comman

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 10-3 Configuration - Dial Peer VoIP ModedoUse the do commands to run User and Privileged mode command

1-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIntroductionShortcutsShortcutsKeystroke Description Up ArrowUse the up arrow key to re-display a p

10-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer VoIP ModeendUse the end command to exit the current configuration mode,

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 10-5 Configuration - Dial Peer VoIP Modeno commandsno destination-patternUse the Dial Peer no destina

10-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer VoIP ModeprefixUse the Dial Peer prefix command to define the prefix of

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 10-7 Configuration - Dial Peer VoIP Modestrip-digitsUse the Dial Peer strip-digits command to configu

10-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Dial Peer VoIP Mode

CHAPTER 11Configuration - Ethernet Interface ModeThe Ethernet Interface Configuration commands allow the user to configure the Ethernet interface para

11-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface ModedescriptionUse the Ethernet Interface description command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-3 Configuration - Ethernet Interface ModedoUse the do commands to run User and Privileged mode com

11-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface ModeendUse the end command to exit the current configuration mo

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-5 Configuration - Ethernet Interface Modefull-duplexUse the Ethernet Interface full-duplex command

CHAPTER 2User ModeUser mode is the first level of commands after logging in. User mode is represented by the > prompt.User Mode Commands•date•enabl

11-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface ModehistoryUse the history command to display commands that hav

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-7 Configuration - Ethernet Interface Modeip default-gatewayUse the Ethernet Interface ip default-g

11-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeip mtuUse the Ethernet Interface ip mtu command to set the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-9 Configuration - Ethernet Interface Modeip ospf authenticationUse the Ethernet Interface ip ospf

11-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeip ospf authentication-keyUse the Ethernet Interface ip os

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-11 Configuration - Ethernet Interface Modeip ospf disableUse the Ethernet Interface ip ospf disabl

11-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeip ospf priorityUse the Ethernet Interface ip ospf priorit

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-13 Configuration - Ethernet Interface Modeip primary-dnsUse the Ethernet Interface ip primary-dns

11-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeip ripip rip enableUse the Ethernet Interface ip rip enabl

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-15 Configuration - Ethernet Interface Modeip routeUse the Ethernet Interface ip route command to c

2-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modedate Use the date command to display the current date. Syntax: > dateExample: adit 3500

11-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeip secondary-dnsUse the Ethernet Interface ip secondary-dn

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-17 Configuration - Ethernet Interface Modeno commandsno firewallUse the no firewall command to dis

11-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeno ip ospf authenticationUse the Ethernet Interface no ip

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-19 Configuration - Ethernet Interface Modeno ip ospf disableUse the Ethernet Interface no ip ospf

11-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeno ip ospf priorityUse the Ethernet Interface no ip ospf p

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-21 Configuration - Ethernet Interface Modeno ip proxy-arpUse the Ethernet Interface no ip proxy-ar

11-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeno remote-adminUse the Ethernet Interface no remote-admin

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-23 Configuration - Ethernet Interface Modeno tos ipUse the Ethernet Interface no tos ip command to

11-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Modeschedule-availabilityUse the Ethernet Interface schedule-a

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 11-25 Configuration - Ethernet Interface ModespeedUse the Ethernet Interface speed command to specify

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-3 User ModeexitUse the exit command to close your current connection if you are in User mode or Pri

11-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Ethernet Interface Mode

CHAPTER 12Configuration - Multilink Interface ModeThe Multilink Interface Configuration commands allow the user to configure the MLPPP parameters.Ente

12-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface ModedescriptionUse the Multilink Interface description command

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-3 Configuration - Multilink Interface ModedoUse the do commands to run User and Privileged mode co

12-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface ModeendUse the end command to exit the current configuration m

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-5 Configuration - Multilink Interface ModehistoryUse the history command to display commands that

12-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeip default-routeUse the Multilink Interface ip default-rou

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-7 Configuration - Multilink Interface Modeip ospf authenticationUse the Multilink Interface ip osp

12-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeip ospf authentication-keyUse the Multilink Interface ip o

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-9 Configuration - Multilink Interface Modeip ospf disableUse the Multilink Interface ip ospf disab

2-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser ModehistoryUse the history command to display commands that have been entered in this session.

12-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeip ospf priorityUse the Multilink Interface ip ospf prior

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-11 Configuration - Multilink Interface Modeip primary-dnsUse the Multilink Interface ip primary-dn

12-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeip rip send-versionUse the Multilink Interface ip rip sen

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-13 Configuration - Multilink Interface Modeip route-modeUse the Multilink Interface ip route-mode

12-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeno commandsno firewallUse the Multilink Interface no fire

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-15 Configuration - Multilink Interface Modeno ip ospf authentication-keyUse the Multilink Interfac

12-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeno ip ospf hello-intervalUse the Multilink Interface no i

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-17 Configuration - Multilink Interface Modeno ip ospf retransmit-intervalUse the Multilink Interfa

12-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeno ip routeUse the Multilink Interface no ip route comman

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-19 Configuration - Multilink Interface Modeno ppp on-demandUse the Multilink Interface no ppp on-d

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-5 User ModepingUse the ping command to send a sequence of ICMP echo request packets to the specifie

12-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeno schedule-availabilityUse the Multilink Interface no sc

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-21 Configuration - Multilink Interface Modeppp authenticationUse the Multilink Interface ppp authe

12-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeppp link-fragmentationUse the Multilink Interface ppp lin

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-23 Configuration - Multilink Interface Modeppp qos-interleavingUse the Multilink Interface ppp qos

12-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Modeppp usernameUse the Multilink Interface ppp username comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-25 Configuration - Multilink Interface Modesip-algUse the Multilink Interface sip-alg command to e

12-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Multilink Interface Mode

CHAPTER 13Configuration - Serial Interface ModeThe Serial Interface Configuration commands allow the user to configure the serial interface parameters

13-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface ModedescriptionUse the Serial Interface description command to se

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-3 Configuration - Serial Interface ModedoUse the do commands to run User and Privileged mode comma

PREFACEPrefaceSafety InformationCAUTION! WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK

2-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow show alarms show ip ospf databaseshow arp show ip ospf interfaceshow caclkcd show ip

13-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeencapsulation pppUse the Serial Interface encapsulation ppp c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-5 Configuration - Serial Interface Modefirewall Use the Serial Interface firewall command to enabl

13-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeip addressUse the Serial Interface ip address command to conf

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-7 Configuration - Serial Interface Modeip ospf authenticationUse the Serial Interface ip ospf auth

13-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeip ospf authentication-keyUse the Serial Interface ip ospf au

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-9 Configuration - Serial Interface Modeip ospf disableUse the Serial Interface ip ospf disable com

13-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeip ospf priorityUse the Serial Interface ip ospf priority co

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-11 Configuration - Serial Interface Modeip primary-dnsUse the Serial Interface ip primary-dns comm

13-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeip rip send-versionUse the Serial Interface ip rip send-vers

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-13 Configuration - Serial Interface Modeip route-modeUse the Serial Interface ip route-mode comman

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-7 User Modeshow alarmsUse the show alarms command to display the active alarms. Syntax: > show

13-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modemultilink-groupUse the Serial Interface multilink-group comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-15 Configuration - Serial Interface Modeno ip addressUse the Serial Interface no ip address comman

13-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeno ip ospf costUse the Serial Interface no ip ospf cost comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-17 Configuration - Serial Interface Modeno ip ospf message-digest-keyUse the Serial Interface no i

13-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeno ip primary-dnsUse the Serial Interface no primary-dns com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-19 Configuration - Serial Interface Modeno ppp authenticationUse the Serial Interface no ppp authe

13-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeno ppp usernameUse the Serial Interface no ppp username comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-21 Configuration - Serial Interface Modeppp authenticationUse the Serial Interface ppp authenticat

13-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeppp link-fragmentationUse the Serial Interface ppp link-frag

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-23 Configuration - Serial Interface Modeppp restart-timerUse the Serial Interface ppp restart-time

2-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow arpUse the show arp command to display the ARP (Address Resolution Protocol) table.

13-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Serial Interface Modeschedule-availabilityUse the Serial Interface schedule-avail

CHAPTER 14Configuration - IPSec ModeThe IPSecConfiguration commands allow the user to configure the VPN IPSec parameters.Enter this sub-group with the

14-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modeaggressive-modeUse the IPSec aggressive-mode command to set to aggressiv

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-3 Configuration - IPSec ModedoUse the do commands to run User and Privileged mode commands. The fo

14-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modedpd-delayUse the IPSec dpd-delay command to set the Dead Period Detectio

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-5 Configuration - IPSec ModeencryptionUse the IPSec encryption command to specify an encryption al

14-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec ModegroupUse the IPSec group command to define the Diffie-Hellman (DH) group

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-7 Configuration - IPSec ModehistoryUse the history command to display commands that have been ente

14-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modeipsec-connUse the IPSec mode ipsec-conn command to enable or disable an

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-9 Configuration - IPSec ModelifetimeUse the IPSec mode lifetime command to set the connection life

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-9 User Modeshow caclkcdUse the show caclkcd command to display the linux kernel crash dumpSyntax: &

14-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modemax-retriesUse the IPSec mode max-retries command to set a maximum numb

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-11 Configuration - IPSec Modenet-typeUse the IPSec mode net-type command to define the network typ

14-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modeno commandsno aggressive-modeUse the IPSec mode no aggressive-mode comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-13 Configuration - IPSec Modeno encryptionUse the IPSec no encryption command to disable encryptio

14-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modeno hashUse the IPSec no hash command to disable a hash algorithm. To se

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-15 Configuration - IPSec Modeno reconnectUse the IPSec no reconnect command to disable automatic r

14-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modeno transform-setUse the IPSec no transform-set command to disable Perfe

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-17 Configuration - IPSec ModereconnectUse the IPSec reconnect command to enable the automatic reco

14-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Moderemote-subnetUse the IPSec remote-subnet command to set the remote subn

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-19 Configuration - IPSec Modesession-keyUse the IPSec session-key command to specify the parameter

2-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow config dynamic-dnsUse the show config dynamic-dns command to display the dynamic DNS

14-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec Modetransform-setUse the IPSec transform-set command to set the allowable e

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-21 Configuration - IPSec ModeExample of IPSec Connection ConfigurationExample of IPSec Connection

14-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - IPSec ModeExample of IPSec Connection ConfigurationAdit 3104(config-ipsec-0)#tran

CHAPTER 15Configuration - L2TPC ModeThe L2TPC Configuration commands allow the user to configure the VPN Layer 2 Tunneling Protocol Connection (L2TPC)

15-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC ModedoUse the do commands to run User and Privileged mode commands. The foll

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-3 Configuration - L2TPC ModeendUse the end command to exit the current configuration mode, and mus

15-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC ModehistoryUse the history command to display commands that have been entere

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-5 Configuration - L2TPC Modeip addressUse the L2TPC ip address command to configure the IP address

15-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeip ospf authenticationUse the L2TPC ip ospf authentication command to en

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-7 Configuration - L2TPC Modeip ospf authentication-keyUse the L2TPC ip ospf authentication-key com

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-11 User Modeshow controller t1Use the show controller t1 command to display the performance statist

15-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeip ospf disableUse the L2TPC ip ospf disable command to disable OSPF pro

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-9 Configuration - L2TPC Modeip ospf priorityUse the L2TPC ip ospf priority command to set the rout

15-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeip primary-dnsUse the L2TPC ip primary-dns command to configure the pri

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-11 Configuration - L2TPC Modeip rip send-versionUse the L2TPC ip rip send-version command to confi

15-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeip route-modeUse the L2TPC ip route-mode command to configure the routi

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-13 Configuration - L2TPC ModemetricUse the L2TPC metric command to configure the Metric of the IP

15-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeno ip default-routeUse the L2TPC no ip default-route command to disable

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-15 Configuration - L2TPC Modeno ip ospf dead-intervalUse the L2TPC no ip ospf dead-interval comman

15-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeno ip ospf message-digest-keyUse the L2TPC no ip ospf message-digest-ke

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-17 Configuration - L2TPC Modeno ip ospf transmit-delayUse the L2TPC no ip ospf transmit-delay comm

2-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow dhcp-leasesUse the show dhcp-leases command to display the DHCP lease table.Syntax:

15-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeno ip secondary-dnsUse the L2TPC no secondary-dns command to disable t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-19 Configuration - L2TPC Modeno ppp on-demandUse the L2TPC no ppp on-demand command to disable PPP

15-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeno ppp usernameUse the L2TPC no ppp username command remove the PPP use

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-21 Configuration - L2TPC Modeppp authenticationUse the L2TPC ppp authentication command to configu

15-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC Modeppp on-demandUse the L2TPC ppp on-demand command to enable on demand th

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-23 Configuration - L2TPC Modeppp time-btwn-reconnectUse the L2TPC ppp time-btwn-reconnect command

15-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - L2TPC ModeshutdownUse the L2TPC shutdown command to disable the interface. To set

CHAPTER 16Configuration - OSPF ModeThe Router OSPF Configuration commands allow the user to configure the OSPF parameters.OSPF (Open Shortest Path Fir

16-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - OSPF Modearea commandsNote: For the following area commands, the first command tha

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-3 Configuration - OSPF Modecompatible rfc1583Use the Router OSPF compatible rfc1583 command to res

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-13 User Modeshow interface descriptionUse the show interface description command to display interfa

16-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - OSPF ModedoUse the do commands to run User and Privileged mode commands. The follo

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-5 Configuration - OSPF ModeendUse the end command to exit the current configuration mode, and must

16-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - OSPF Modenetwork areaUse the Router OSPF network area command to define the interf

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-7 Configuration - OSPF Modeno commandsno areaUse the Router OSPF no area command to remove a speci

16-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - OSPF Modeno compatible rfc1583Use the Router OSPF no compatible rfc1583 command to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-9 Configuration - OSPF Moderouter-idUse the Router OSPF router-id command to use a fixed router ID

16-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - OSPF ModeSample ConfigurationSample Configurationospfrouter ospfno compatible rfc

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-11 Configuration - OSPF ModeSample Configurationip ospf priority 2exitinterface ethernet 2ip addre

16-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - OSPF ModeSample Configuration

CHAPTER 17Configuration - PPTPC ModeThe PPTPC Configuration commands allow the user to configure the VPN (Virtual Private Network) Point-to-Point Tunn

2-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow interface ethernetUse the show interface ethernet command to display the Ethernet in

17-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC ModedoUse the do commands to run User and Privileged mode commands. The foll

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-3 Configuration - PPTPC ModeendUse the end command to exit the current configuration mode, and mus

17-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC ModehistoryUse the history command to display commands that have been entere

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-5 Configuration - PPTPC Modeip addressUse the PPTP Client ip address command to configure the IP a

17-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeip ospf authenticationUse the PPTP Client ip ospf authentication command

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-7 Configuration - PPTPC Modeip ospf authentication-keyUse the PPTP Client ip ospf authentication-k

17-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeip ospf disableUse the PPTP Client ip ospf disable command to disable OS

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-9 Configuration - PPTPC Modeip ospf priorityUse the PPTP Client ip ospf priority command to set th

17-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeip primary-dnsUse the PPTP Client ip primary-dns command to configure t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-11 Configuration - PPTPC Modeip rip send-versionUse the PPTP Client ip rip send-version command to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-15 User Modeshow interface serialUse the show interface serial command to display the configuration

17-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeip route-modeUse the PPTP Client ip route-mode command to configure the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-13 Configuration - PPTPC Modeno commandsno firewall Use the PPTP Client no firewall command to dis

17-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeno ip ospf authentication-keyUse the PPTP Client no ip ospf authenticat

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-15 Configuration - PPTPC Modeno ip ospf hello-intervalUse the PPTP Client no ip ospf hello-interva

17-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeno ip ospf retransmit-intervalUse the PPTP Client ip ospf retransmit-in

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-17 Configuration - PPTPC Modeno ip routeUse the PPTP Client no ip route command remove an IP route

17-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeno ppp exec-timeoutUse the PPTP Client no ppp exec-timeout command to d

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-19 Configuration - PPTPC Modeno ppp time-btwn-reconnectUse the PPTP Client no ppp time-btwn-reconn

17-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeno sip-algUse the PPTP Client no sip-alg command to disable SIP ALG on

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-21 Configuration - PPTPC Modeppp exec-timeoutUse the PPTP Client ppp exec-timeout command to set t

iv Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrefaceNoticesThis manual contains important information and warnings that must be followed to ensur

2-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow interface statsUse the show interface stats command to display the interface statist

17-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Modeppp restart-timerUse the PPTP Client ppp restart-timer command to confi

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-23 Configuration - PPTPC Modeschedule-availabilityUse the PPTP Client schedule-availability comman

17-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPC Mode

CHAPTER 18Configuration - PPTPS ModeThe PPTP Server Configuration commands allow the user to configure the VPN (Virtual Private Network) Point-to Poin

18-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPS ModedoUse the do commands to run User and Privileged mode commands. The foll

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 18-3 Configuration - PPTPS ModeendUse the end command to exit the current configuration mode, and mus

18-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPS ModehistoryUse the history command to display commands that have been entere

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 18-5 Configuration - PPTPS Modeno commandsno idle-timeUse the PPTP Server no idle-time command to res

18-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPS Modeno shutdownUse the PPTP Server no shutdown command to set the admin stat

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 18-7 Configuration - PPTPS ModeshutdownUse the PPTP Server shutdown command to set the admin state of

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-17 User Mode Status: Unassigned Device=LinkCC 8 State=down Dependency=None Status:

18-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - PPTPS Mode

CHAPTER 19Configuration - RADIUS ModeThe RADIUS Configuration commands allow the user to configure the RADIUS parameters for each interface.This sub-g

19-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - RADIUS ModeauthenticationUse the RADIUS authentication command to set the RADIUS c

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 19-3 Configuration - RADIUS ModedoUse the do commands to run User and Privileged mode commands. The f

19-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - RADIUS ModeendUse the end command to exit the current configuration mode, and must

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 19-5 Configuration - RADIUS ModehostUse the RADIUS host command to set the RADIUS server IP address o

19-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - RADIUS Mode

CHAPTER 20Configuration - VLAN ModeThe VLAN Configuration commands allow the user to configure the global VLAN parameters.This sub-group is entered wi

20-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN ModedoUse the do commands to run User and Privileged mode commands. The follo

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 20-3 Configuration - VLAN ModeendUse the end command to exit the current configuration mode, and must

2-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow ip ospfUse the show ip ospf command to display the general OSPF routing process info

20-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN Modeno commandsno port-dot1qUse the VLAN no port-dot1q command to disable dot

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 20-5 Configuration - VLAN Modeport-dot1qUse the VLAN port-dot1q command to enable dot1q tagging for t

20-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN Modeport-protocol-filterUse the VLAN port-protocol-filter command to enable V

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 20-7 Configuration - VLAN Modetag-allUse the VLAN tag-all command to enable dot1q tagging for all por

20-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN Mode

CHAPTER 21Configuration - VLAN Port ModeThe VLAN Port Configuration commands allow the user to configure the VLAN port parameters.This sub-group is en

21-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN Port ModedoUse the do commands to run User and Privileged mode commands. The

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 21-3 Configuration - VLAN Port ModeendUse the end command to exit the current configuration mode, and

21-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN Port Modeno commandsno portUse the VLAN no port command to remove this port’s

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 21-5 Configuration - VLAN Port ModepriorityUse the VLAN priority command to set the VLAN priority lev

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-19 User Modeshow ip ospf databaseUse the show ip ospf database command to display information relat

21-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - VLAN Port Mode

CHAPTER 22Configuration - Voice Port ModeThe Voice Port Configuration commands allow the user to configure the Voice Port parameters.Enter this sub-gr

22-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Modedigit-map (global)Use the Voice Port digit-map global command to co

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 22-3 Configuration - Voice Port ModedoUse the do commands to run User and Privileged mode commands. T

22-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port ModeendUse the end command to exit the current configuration mode, and

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 22-5 Configuration - Voice Port Modeno digit-map (global)Use the Voice Port no digit-map command to r

22-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Mode

CHAPTER 23Configuration - Voice Port FXS ModeThe Voice Port FXS Configuration commands allow the user to configure the Voice Port FXS parameters.Enter

23-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port FXS Modecomfort-noiseUse the Voice Port FXS comfort-noise command to en

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 23-3 Configuration - Voice Port FXS ModedoUse the do commands to run User and Privileged mode command

2-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser ModeExample: adit 3500> show ip ospf database Router Link States (Area 0.0

23-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port FXS Modeecho-cancelUse the Voice Port FXS echo-cancel command to enable

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 23-5 Configuration - Voice Port FXS ModehistoryUse the history command to display commands that have

23-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port FXS Modeno commandsno comfort-noiseUse the Voice Port FXS no comfort-no

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 23-7 Configuration - Voice Port FXS Modeoutput-gainUse the Voice Port FXS output-gain command to set

23-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port FXS Modesignal Use the Voice Port FXS signal command to set the signali

CHAPTER 24Configuration - Voice Port Trunk ModeThe Voice Port Trunk Configuration commands allow the user to configure the Voice Port Trunk parameters

24-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk Modecomfort-noiseUse the Voice Port Trunk comfort-noise command t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-3 Configuration - Voice Port Trunk ModedescriptionUse the Voice Port Trunk description command to

24-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk ModedoUse the do commands to run User and Privileged mode command

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-5 Configuration - Voice Port Trunk Modeecho-cancelUse the Voice Port Trunk echo-cancel command to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-21 User Modeshow ip ospf interfaceUse the show ip ospf interface command to display OSPF related in

24-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk ModehistoryUse the history command to display commands that have

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-7 Configuration - Voice Port Trunk Modeisdn switch-type (PRI)Use the Voice Port Trunk isdn switch-

24-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk Modeno commandsno comfort-noiseUse the Voice Port Trunk no comfor

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-9 Configuration - Voice Port Trunk Modeno digit-mapUse the Voice Port Trunk no digit-map command t

24-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk Modeno registration lineUse the Voice Port Trunk no registration

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-11 Configuration - Voice Port Trunk Modeoutput-gainUse the Voice Port Trunk output-gain command to

24-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk ModeregistrationThe registration command enables the user to Add

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-13 Configuration - Voice Port Trunk Moderegistration line enableUse the Voice Port Trunk registrat

24-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk Moderegistration line loggingUse the Voice Port Trunk registrati

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-15 Configuration - Voice Port Trunk ModetrunkUse the Voice Port Trunk trunk command to set the Tru

2-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow ip ospf neighborUse the show ip ospf neighbor command to display OSPF neighbor infor

24-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Port Trunk Mode

CHAPTER 25Configuration - Voice Service SIP ModeThe Voice Service SIP Configuration commands allow the user to configure the Voice Trunk SIP parameter

25-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Modecalling-party-discUse the Voice Service SIP calling-party-di

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-3 Configuration - Voice Service SIP ModedoUse the do commands to run User and Privileged mode comm

25-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP ModedtmfUse the Voice Service SIP dtmf command to configure the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-5 Configuration - Voice Service SIP ModeendUse the end command to exit the current configuration m

25-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Modefax-protocol-t38 ecsUse the Voice Service SIP fax-protocol-t

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-7 Configuration - Voice Service SIP Modefax-protocol-t38 signalingUse the Voice Service SIP fax-pr

25-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Modegateway-ipUse the Voice Service SIP gateway-ip command to se

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-9 Configuration - Voice Service SIP Modeno commandsno conferenceUse the Voice Service SIP no confe

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-23 User Modeshow licensesUse the show licenses command to display all enabled feature keys. Synta

25-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Modeno redundancy filter-incomingUse the Voice Service SIP no r

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-11 Configuration - Voice Service SIP Modeoutbound-proxyUse the Voice Service SIP outbound-proxy co

25-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Modeprivacy-modeUse the Voice Service SIP privacy-mode command

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-13 Configuration - Voice Service SIP Modeproxy-typeUse the Voice Service SIP proxy-type command to

25-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Moderedundancy advance-timeoutUse the Voice Service SIP redunda

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-15 Configuration - Voice Service SIP Moderedundancy rollback-timerUse the Voice Service SIP redund

25-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Moderedundancy ttlUse the Voice Service SIP redundancy ttl comm

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-17 Configuration - Voice Service SIP ModeregistrationUse the Voice Service SIP registration comman

25-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Modesession-timersession-timer modeUse the Voice Service SIP se

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-19 Configuration - Voice Service SIP Modesession-timer timeoutUse the Voice Service SIP session-ti

2-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser ModeExample: Adit 3500> show log t1 1 minor System Log Message Jan 1 00:00:08 2003

25-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIConfiguration - Voice Service SIP Mode

INDEXAaccess lan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4access wan . . . . . . . . . . . . . . . . . . . . . . . .

Index - 2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexdomain-name . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25host . . . . . .

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 3 Indexsnmp-servercommunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60ena

Index - 4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexip ospfauthentication . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9authenti

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 5 IndexConfiguration-L2TPCdo commands . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index - 6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexip primary-dns . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-11ip rip enable

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 7 Indexauthentication . . . . . . . . . . . . . . . . . . . . . . . 17-13authentication-key

Index - 8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexauthentication-key . . . . . . . . . . . . . . . . . . . 13-15cost . . . . . . . . .

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 9 Indexnocomfort-noise . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-6echo-cancel

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-25 User Modeshow nat-fwUse the show nat-fw command to display the current NAT and firewall connecti

Index - 10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexdate (clock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2, 3-4debug

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 11 Indexip ripenable . . . . . . . . . . . . . . . . 11-14, 13-11, 15-10, 17-10receive-versi

Index - 12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexfxs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38trunk . .

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 13 Indexsession-timer mode . . . . . . . . . . . . . . . . . . . . . . . 25-10set-pfs . . .

Index - 14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexaccess-list . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23controller t1

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI Index - 15 Indexrefresher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-18timeo

Index - 16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIIndexUupgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-67Us

TABLE OF CONTENTSPrefaceSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow port-triggerUse the show port-trigger command to display all port triggering informa

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-27 User Modeshow serviceUse the show service command to displays all services. Syntax: > show se

2-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow usersUse the show users command to displays all users on this system. Syntax: > s

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-29 User ModeExample: Adit MSR> show versionApplication Version: 2.0.0.5Compilation Time: Thu Jan

2-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Modeshow voice-port fxsUse the show voice-port fxs command to display the FXS interface infor

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-31 User Modeshow voice-port trunkUse the show voice-port trunk command to display the voice trunk s

2-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser ModeExample: Adit MSR> show voice-port trunk 1******************************* PRI 1 ****

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-33 User ModetracerouteUse the traceroute command to trace a route to a remote host. Syntax: >

2-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIUser Mode

CHAPTER 3Privileged ModeThe Privileged Mode allows the operator access to the configuration modes.This Mode is entered with the > enable command fr

vi Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents reload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeclear clear arpUse the clear arp command to clear the ARP (Address Resolution Proto

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-3 Privileged Modeconfigure terminalUse the configure terminal command to enter the configuration mo

3-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged ModeExample: Adit MSR#copy path tftp://192.168.1.100/MSR_config running-configAdit MSR#C

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-5 Privileged Modedebugdebug portmon all Use the debug portmon all command allows the user to monito

3-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modedebug portmon {rx|tx|both} Use the debug portmon {rx|tx|both} command allows the use

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-7 Privileged Modedebug portmon ethernet Use the debug portmon ethernet command allows the user to m

3-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modedebug portmon management Use the debug portmon management command allows the user to

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-9 Privileged Modedebug portmon multilink Use the debug portmon multilink command allows the user to

3-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modedebug portmon raw Use the debug portmon raw command allows the user to display raw

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-11 Privileged Modedebug portmon serial Use the debug portmon serial command allows the user to moni

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI vii Table of Contents remote-admin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-12 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modedebug traceUse the debug trace command allows the user to configure trace settings.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-13 Privileged ModehelpUse the help command to display the help information for this command. Note:

3-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged ModehistoryUse the history command to display commands that have been entered in this s

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-15 Privileged Modelog clearUse the log clear command to clear the history of the log. Syntax: # l

3-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeno debugno debug portmonUse the no debug portmon command to stop the Packet Monitor

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-17 Privileged ModepingUse the ping command to send a sequence of ICMP echo request packets to the s

3-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged ModereloadUse the reload command to reset the system.CAUTION! THIS IS A SERVICE AFFEC

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-19 Privileged ModeshowFor maneuverability through these commands, all command names in blue or ital

3-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow alarmsUse the show alarms command to display the active alarms. Syntax: # sh

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-21 Privileged Modeshow arpUse the show arp command to display the ARP (Address Resolution Protocol)

viii Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLITable of Contents 7 Configuration - DHCP Pool Ethernet Modedo . . . . . . . . . . . . . . . . . .

3-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow caclkcdUse the show caclkcd command to display the linux kernel crash dumpSynt

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-23 Privileged Modeshow config access-controlUse the show config access-control command to display a

3-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow config controller t1Use the show config controller t1 command to display the T

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-25 Privileged Modeshow config dmz-hostUse the show config dmz-host command to display the DMZ infor

3-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow config interface ethernetUse the show config interface ethernet command to dis

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-27 Privileged Modeshow config interface multilinkUse the show config interface multilink command to

3-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow config interface serialUse the show config interface serial command to display

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-29 Privileged Modeshow config ip dhcp ethernetUse the show config ip dhcp ethernet command to displ

3-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow config nat-bypassUse the show config nat-bypass command to display the NAT Byp

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-31 Privileged Modeshow config remote-adminUse the show config remote-admin command to display the r

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI ix Table of Contents 10 Configuration - Dial Peer VoIP Modedestination-pattern . . . . . . . . . . .

3-32 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow config serviceUse the show config service command display the current defined

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-33 Privileged Modeshow config voice-port fxsUse the show config voice-port fxs command to display t

3-34 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow config voice-port trunkUse the show config voice-port trunk command display th

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-35 Privileged Modeshow controller lccUse the show controller lcc command to display the settings fo

3-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow controller t1Use the show controller t1 command displays the T1 configuration

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-37 Privileged Modeshow dhcp-leasesUse the show dhcp-leases command to display the DHCP lease table.

3-38 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow interface descriptionUse the show interface description command to display the

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-39 Privileged Modeshow interface ethernetUse the show interface ethernet command to display the Eth

3-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLIPrivileged Modeshow interface serialUse the show interface serial command to display the configura

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-41 Privileged Modeshow ip ospfUse the show ip ospf command to display the general OSPF routing proc