Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 205)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 6-7

Configuration - T1 Controller Mode

lbo

lbo long

Use the Controller T1 lbo long command to set Line Build Out on the T1.

Syntax: (config-cont-t1-{n})# lbo long {-7.5db|-15db|-22.5db}

Example: (config-cont-t1-1)# lbo long -15db

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

lbo short

Use the Controller T1 lbo short command to set Line Build Out on the T1.

Syntax: (config-cont-t1-{n})# lbo short {133|266|399|533|655}

Example: (config-cont-t1-1)# lbo short 266

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500

Field Definition

-7.5db CSU attenuation for LBO of 7.5dB

-15db CSU attenuation for LBO of 15dB

-22.5db CSU attenuation for LBO of 22.5dB

Field Definition

133 DSX-1 equalization for 0-133 ft. Default.

266 DSX-1 equalization for 133-266 ft.

399 DSX-1 equalization for 266-399 ft.

533 DSX-1 equalization for 399-533 ft.

655 DSX-1 equalization for 533-655 ft.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 205

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca