Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Pobierz pdf (Strona 292)

100

101

12-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Multilink Interface Mode

ppp link-fragmentation

Use the Multilink Interface ppp link-fragmentation command to configure the threshold byte size of

the packet, for Interleaving. Note: If the packet is > the set threshold, the packet will be split in half and

sent.

Syntax: (config-int-mlink-{n})# ppp link-fragmentation number

Example: (config-int-mlink-1)# ppp link-fragmentation 600

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ppp on-demand

Use the Multilink Interface ppp on-demand command to enable on demand the feature. On demand

attempts to connect only when packets are sent. To disable PPP on demand, see no ppp on-demand

command on page 12-19.

Syntax: (config-int-mlink-{n})# ppp on-demand

Example: (config-int-mlink-1)# ppp on-demand

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ppp password

Use the Multilink Interface ppp password command set the PPP password. To delete a PPP password,

see no ppp password command on page 12-19.

Syntax: (config-int-mlink-{n})# ppp password password

Example: (config-int-mlink-1)# ppp username test-user-pswrd

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

number Range 320 - 1600, with a default of 1600 bytes.

Field Definition

password Enter the PPP password, with a maximum of 19 characters.

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 495 496

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Instrukcja Użytkownika Strona 292

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca